Salt Spray Test Chamber or the Salt Fog Test Chambers designed at Labtronixed INC is n equipment that is used in the testing of properties that are corrosion resistant in various metal parts, nuts, and bolts that are plated in zinc, coating of the surface, and paint. In the Labtro Salt Spray Test Chambers, there are coated samples kept put under an environment that is made up of artificial corrosion. This is how the inside of the chamber can be rightly evaluated if it is suitable for coating of that surface, and can be used as a secured finish on the final products ready to be sold. These testing samples are carefully tested at a certain amount of time that has been determined previously. If the corrosion is higher, the longer will be the resistivity test time duration.
Labtro is well known for manufacturing and supplying the Salt Spray (fog) Test Chamber all across the globe and in every type of big or small industry. The Salt Spray Test Chamber has a rough construction but a user friendly design, made up of stainless steel body, and it also follows the standards of testing.
FEATURES & ADVANTAGES
- Easy loading and unloading of large samples
- Digital microprocessor-based control System
- Auto water refill system
- Over temperature protection
- Low water alarm
- Durable construction
- Auto Fog Collection System
- Energy efficient design
Technical Specification
|
Temperature range |
35°C±1°C / 50°C ±1°C as per customer requirement |
|
Temperature of pressure barrel |
47°C±1°C / 63°C ±1°C |
|
Temperature sensor |
PT100 |
|
Humidity range |
≥93% (No Controlled / Display) |
|
Controller type |
02 No. PID temperature controllers for chamber and pressure vessel |
|
Timer |
Digital timer 9999 hours |
|
Canopy |
Made of Acrylic Manual lifting |
|
Chamber construction |
PVC reinforced hard plastic sheets for complete corrosion proof construction |
|
Brine tank (reservoir) |
25 liters inbuilt brine tank Low water level indicator |
|
Salt fog fallout rate |
1- 2ml per 80cm2 per hour |
|
Spray mode |
Continuous or intermittent spray |
|
Compressed Air pressure |
1.00 ±0.01kgf/cm² |
|
Sample racks |
08 Nos. V type racks 12 Nos. support rods |
|
Fog accessories |
01. No. Spray tower 02 Nos. cup collectors |
|
Standard fittings |
Mains ON/OFF Pressure regulator Dial type pressure gauge Drain system Spray solenoid valve |
|
Safety features |
Over temperature protection Low water protection |
|
Power supply |
220 Volts 50 Hz |
STANDARD DIMENSIONS / SIZE
|
Model |
Dimension |
Volume |
|
LSSC-108 |
600 x 450 x 400 mm |
108 Liters |
|
LSSC-125 |
600 x 450 x 450 mm |
125 Liters |
|
LSSC-270 |
900 x 600 x 500 mm |
270 Liters |
|
LSSC-600 |
1200 x 1000 x 500 mm |
600 Liters |
|
LSSC-800 |
1600 x 1000 x 500 mm |
800 Liters |
|
LSSC-1000 |
2000 x 1000 x 500 mm |
1000 Liters |
